“Monterey Week” is almost upon us. What better place to be in mid-August than on the Monterey Peninsula? PML will be hitting the Monterey auction circuit in full force this year. Russo & Steele, RM, Gooding, and Bonhams all have Porsches consigned, so the action ought to be fast and furious all weekend long. At Russo & Steele, the action starts Thursday, August 12th (click here for the schedule).

We present here a few of the listings from Russo & Steele. They have a fairly broad selection ranging from 356s, to SWB and LWB “Longhood” 911s, a track-only 911, a US-spec Carrera, an unusual “delete spoiler” M491 Cabriolet, a 930 Turbo Coupe, and a 996 Twin Turbo Coupe**. Pre-auction estimates were not available at press time. (Please note: this is not a complete listing;cars are still being added to the auction line-up). For any car guy with 120 octane in their veins, this is truly a “pilgrimage to Mecca”… We hope to see you up there. Please click here for the auction location – a downloadable pdf map is available.

Scroll down the page to view the offerings – for further information on any of the cars, simply click on it’s image. (When clicking on the links; be sure to hit your browser’s “back” button to return to this page afterwards).

**PML has not inspected any of these cars, nor do we have any vested interest in their sale.

'65 356C Cabriolet - Nardi wheel, COA, Excellent example

'60 356B 1600 Super Cabriolet - Outstanding Restoration, COA, Reutter Body

'63 356 Super 90 Coupe - T-6 body, COA, Fresh Maintenance, Great Show/Driver!

'67 911 Coupe - SWB Car, Numbers Matching, Recent Restoration, Multi-purpose Show/Driver

'67 911 Coupe - SWB Car, Bahama Yellow, Original Drive Train, COA, Excellent Original Car

'70 911T Coupe - LWB Car, High-end Driver Quality Example, ONE Owner From New!

'73 911S Coupe - LWB Car, Rust Free CA Car, Original Engine Upgraded To 2.7 Spec.

'77 930 Turbo Coupe - Track Car, Highly Built and Yes, It's Fast!

'75 911 Carrera Coupe - Only 395 Were Built For The US Market

'88 Carrera Cabriolet - M491 Body With Very Rare Spoiler Delete

'84 930 Turbo Coupe - Euro Spec, Federalized For US

'04 996 Twin Turbo Coupe - An Absolute Hoot To Drive!

2.7-litre / G, H, I and J series (1973–1976)
MY 1974 saw three significant changes. First, the engine size was increased to 2687 cc giving an increase in torque. Second, was the introduction of impact bumpers to conform with low speed protection requirements of US law, these bumpers being so successfully integrated into the design that they remained unchanged for 15 years. Thirdly, the use of K-Jetronic CIS Bosch fuel injection in two of the three models in the line up— the 911 and 911S models, retaining the narrow rear wings of the old 2.4, now had a detuned version of the RS engine producing 150 and 175 PS (110 and 129 kW) respectively.

Carrera 2.7 / G and H series (1974-1975)
The Carrera 2.7, now a regular production model, inherited the wider rear wings of the RS together with its 210 PS (154 kW) MFI engine and was indeed mechanically identical to the 1973 RS and still weighed the same at 1075 kg (2370 lb). All three models were given high backed front seats.

The 930 Turbo was introduced in 1975.

The Carrera 3.0 was introduced in 1976 with what was essentially the Turbo’s 2994 cc engine minus the turbocharger, and with K-Jetronic CIS although now developing 200 PS (147 kW).

The well known problem of pulled cylinder head studs with the K-Jetronic 2.7 engine only occurred in hot climates. This emerged in 1975 in California where thermal reactors, aimed at reducing emissions, were fitted below the cylinder heads thus causing heat build up around the magnesium crankcase and then made worse by the lean running K-Jetronic CIS. The fitting of a 5-blade engine fan instead of the usual 11-blade further compounded the situation. Bearing in mind Porsche’s largest market being the USA, the 930 Turbo, Carrera 3.0 and all subsequent models used aluminium alloy crankcases which were around 15 lb (7 kg) heavier.

The Bosch K-Jetronic CIS varied fuel pressure to the injectors dependent on the mass airflow. While this system was exceedingly reliable, it did not allow the use of as “hot” cams as MFI or carburettors allowed. Therefore the 911S’s horsepower decreased from 190–175 PS (140–128 kW) despite the displacement increase from 2.4–2.7 L. However, the engine did have increased drivability. The 210 PS (154 kW) Carrera 2.7 with MFI was not sold in the US owing to emission regulations— instead they received a ‘Carrera’ fitted with a 911S engine producing 175 PS (129 kW; 173 hp), later reduced to 165 (121 kW), and in California even down to 160 PS (118 kW).

912E
Also produced for the 1976 “model year”, for the U.S. market, was the 912E, a 4-cylinder version of the 911 like the 912 that had last been produced in 1969. It used the I-series chassis and the 2.0 Volkswagen engine from the Porsche 914. In all, 2099 units were produced. In 1976 the Porsche 924 took this car’s place for the 1977 “model year” and beyond. The power was supplied by a 4 cylinder high performance fuel injection motor also used in the 411 Volkswagen. Less than 6000 were built.

Carrera RS (1973 and 1974)
These models, valued by collectors, are considered by many to be the greatest classic 911s all-time. RS stands for Rennsport in German, meaning motorsport or circuit racing. The Carrera name was reintroduced from the 356 Carrera which had itself been named after Porsche’s victories in the Carrera Panamericana races in Mexico in the 1950s. The RS was built so that Porsche could enter racing formulae that demanded that a certain minimum number of production cars were made. Compared with a standard 911S, the Carrera 2.7 RS had a larger engine (2687 cc) developing 210 PS (150 kW; 210 hp) with MFI, revised and stiffened suspension, a “ducktail” rear spoiler, larger brakes, wider rear wheels and rear wings. In RS Touring form it weighed 1075 kg (2370 lb), in Sport Lightweight form it was about 100 kg (220 lb) lighter, the saving coming from the thin-gauge steel used for parts of the bodyshell and also the use of thinner glass. In total, 1580 were made, comfortably exceeding the 500 that had to be made to qualify for the vital FIA Group 4 class. 49 Carrera RS cars were built with 2808 cc engines producing 300 PS (221 kW).

In 1974, Porsche created the Carrera RS 3.0 with K-Jetronic Bosch fuel injection producing 230 PS (169 kW).It was almost twice as expensive as the 2.7 RS but offered a fair amount of racing capability for that price. The chassis was largely similar to that of the 1973 Carrera RSR and the brake system was from the Porsche 917. The use of thin metal plate panels and a spartan interior enabled the shipping weight to be reduced to around 900 kg (1984 lb).

1976 Porsche 911 2.7The Carrera RSR 3.0 and Carrera RSR Turbo (its 2.1 L engine due to a 1.4x equivalency formula) were made in tiny numbers for racing. The turbo car came second at the 24 Hours of Le Mans in 1974, a significant event in that its engine would form the basis of many future Porsche attempts in sportscar racing, and can be regarded as the start of its commitment to turbocharging.